Repair Xbox 360 Disc Read Error in 40 minutes

If you have the Xbox 360 disc read error then you might think that you should replace the disk drive. This is not the case. This article will tell you what causes the disc read error on Xbox 360 and will give you a way that you can solve the problem.

You can tell if you have this error on your console because when you insert a disc into the drive that is a hard game you get a message that pops up saying: "Please insert an Xbox 360 game disc", this can be frustrating not say the least.

Well the DVD drive error is caused by the same thing as the 3 red lights are caused by overheating and that is, except the 3 red lights mean that another part of the motherboard was shot.

But sometimes the DVD drive takes all the heat that is when you get this problem as some of the fries connectors on the back of your DVD drive.

So all you need to do to solve this problem is to stop the connectors, taking so much heat and the DVD drive working again like new.

You should not do the towel method though, as what this does is heat the solder on the motherboard and allows it to bend slightly due to the heat and this will solve the problem, but not for a long time and then you will find that you are in trouble again as happen again.

If you want to permanently solve this problem and get back to your games then you will need to send it back to MS or repair and that you can do with an Xbox 360 repair guide that you will be able to find on the web.

Make sure that if you do get a guide that covers this error as many do not and also comes with a full warranty!

I hope this article has explained why this problem occurs and how you can solve the problem!

Good Luck! ......